1) This road barrier provides open/close time: 0.8 / 1.5 sec.optional

2) Straight arm with rubber bar, Max.length following:

     3m for 0.8 sec.

     3.5m for 1.5 sec.

3) This road barrier gate is Inclusive of arm and "push button" which opens/closes barrier

4) This road barrier is exclusive of LED light bar,remoter, boom bracket and anti-collision mechanism: need to buy extrally

5) This road barrier gate provides optional housing color as yellow (default),orange, white, red and blue

6) This road barrier gate provides optional boom arm direction as leftward or rightward

Free-maintenance torque motor ensures 100% duty cycle operation with 5 million MTBF and 0.8 second open/close time for toll gate and parking lots wth high traffic flow.

Simple structure and no limit switch design ensures easy installation and maintenance which reduces your labor cost

System always automatically check operation status and errors will be shown on the LED tube of the controller

The housing adopts 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and unfading in 5 years, conformed to the IP54 dustproof and waterproof, Simple design also decorates your premises

Once anti-collision mechanism installed, it will protects the boom arm not to be damaged once boom arm was collided by a vehicle.

While moving down,arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is adjustable.

While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.

While arm moving down, If infrared transportation between transmitter and receiver is blocked by human or vehicle, the arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.

If a vehicle is coming while arm moving down, the arm will immediately go back to vertical position once a open command is given, which protect the vehicle not to be hit by arm.

While arm moving up, the arm will immediately go down once a close command is given

Once this function is set "ON", the barrier will automatically close after given time (1-90 seconds adjustable) if there is no vehicle passed after barrier open.

If loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered

If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered

Once power is off, just open the cabinet and manually control the barrier by a gear mechanism. Also barrier boom can be manually locked in any position between horizontal and vertical, the lock status will remain until unlock manually.

If power is suddenly off while boom closing, boom will automatically close down fully if the angle between boom and vertical plane beyond 45 degree. If power failure occurs during boom opening, boom will automatically continue to open up fully if the angle between boom and level surface beyond 45 degrees.

The barrier remains low power consumption even without closing and opening input, which will keep the motor in normal temperature. The lubricant will not be frozen so that the barrier will keep working in frozen environment

A transparent plastic covers on the Control Board to makes Control Board water proof and dust proof, also protects operator

1) Power: AC 220±10%,50/60HZ, Max.0.5A

2) AC Motor: 70W concreted decelerating torque motor

3) Controller: Intel 80C51 MCU, 40 MHz,controlled silicon motor control

4) Spring: multi-spring balance

5) Loop detector input: pulse width 100>ms

    Infrared detector input: pulse width 100>ms

    Up & Down input: pulse width 100>ms

6) Traffic light output: relay output, max. current 1A

7) Loop detector Syn. output: relay NO output, AC220V/0.5A, DV 12V/1A

8) Wireless remoter(optional): two button remote transmitter, distance>20m

9) RS 485 interface: 9600bps, ASCII decimal encoded

10) Arm:45×100mm Aluminum alloy

11) Housing material: 2mm cold-roller sheet, IP 54 level

       Housing size: 950mm×320mm×329mm

       Package size: 1040mm×460mm×390mm

12) G.W: 55 KG

13) Operating temperature: -25°c -55°c;

14) Humidity:10%-95%

This road barrier gate provides a secure and convenient solution of stopping unauthorized vehicle or giving access to authorized vehicle on toll gate, or parking lots with high traffic flow such as shopping center, exhibition center, hospitals, airports etc.

Ask us for Catalogue and pricelist covers all models with different boom arm shape(straight/crank/fence), boom arm length(Max.6m) and opening / closing time (0.8/1.5/2/3/4 sec.)